.

0.00 New 0):?>

Lewansoul 20Kg Rc Servo High Torque Servo Motors, Waterproof Full Metal Gear Steering Servo For 1/6 1/8 1/10 1/12 Rc Car Robot Diy, Digital Servo With 25T Servo Horn, Control Angle 270°

Lewansoul 20Kg Rc Servo High Torque Servo Motors, Waterproof Full Metal Gear Steering Servo For 1/6 1/8 1/10 1/12 Rc Car Robot Diy, Digital Servo With 25T Servo Horn, Control Angle 270°

Brand:
Sku : ADIB07569WJ1M
Upc : 651519699478
Availability:
Out Of Stock
Price: $19.04
Shipping & Taxes will be calculated at Checkout.
US Delivery Time: 3-5 Business Days.
Outside US Delivery Time: 8-12 Business Days.


0   Reviews(0)  |   Write a review

Specifications:
Weight: 65G(2.32Oz)
Dimension: 40*20*40.5Mm(1.57*0.78*1.59Inch)
Speed: 0.16Sec/60(7.4V)
Torque:20 KgCm (277.6 OzIn) 6.6V
Working Voltage: 6-7.4V
Min Working Current: 1A
No-Load Current: 100Ma
# Spline: 25T(6Mm In Diameter)
The Servo Wire: 30Cm(11.8Inch) In Length

Control Specifications:
Control Method: Pwm
Pulse Width: 500~2500
Duty Ratio: 0.5Ms~2.5Ms
Pulse Period: 20Ms

Wire Layout:
Red Wire: +
Black Wire: Gnd
White Wire: Pwm/Signal

Please Make Sure That The Duty Cycle Of The Controller You Are Using Conform To Our Specifications, Otherwise The Servo Can'T Turn Up To Claimed Degree

Package Contents:
1 X Digital Servo
1 X Servo Horn Kit(As Shown In The Figure)

If You Have Any Questions, Please Feel Free To Contact Us, We Will Help You As Soon As Possible

Note:
Please Be Sure To Avoid Locked-Rotor When Using Servo, Locked-Rotor Means That Artificially Or Machine Obstructs The Servo To Rotate Normally, The Locked-Rotor Will Lead To Internal Current Increased To More Than 7 Times And The Temperature Increases, Servo Will Burn Out.

Notice For Use:
1. It'S Recommended That Use Lithium Polymer Battery With High Rate Discharge(Min 5C), Please Don'T Use Dry Battery.
2. Please Use A Short And Thick Power Cord, Don'T Use Dupont Cord

Features

  • Note: Ld-27Mg Model Has Been Renamed As Hps-2027Mg As Part Of Our Brand'S Upgrade.
  • 20Kg-270High Torque Servo Motor: This Rc Servo Boasts A Maximum Torque Of 20Kg.Cm 7.4V, Enhanced By Its Accompanying Metal Servo Arm. Delivering Robust Power, It Is Housed Within An Anodized Aluminum Case That Facilitates Excellent Heat Dissipation And Effectively Reduces Power Consumption.
  • Superior Quality & High Performance: This Digital Rc Servo Comes With Metal Gear And Dual-Ball Bearings, Which Are Well-Made With Exceptional Performance, Stability, And Minimal Noise Output. By Integrating A High-Precision Potentiometer, Its Accuracy And Linearity Are Greatly Enhanced Leading To An Extended Service Life.
  • Perfect Servo For Model Diy & Ip67 Waterproof: It Fits 1/6 1/8 1/10 1/12 Rc Cars, Robots, Vehicle/Boat/Airplane Models, And Any Diy. Crafted With High Precision And Thorough Sealing, This Rc Servo Provides Ip67 Water Resistance, Which Allows It To Operate Even In The Presence Of Water Splashes.
  • Size & Weight: Size: 40*20*40.5Mm (1.57*0.8*1.59Inch); Weight: 68G (0.15 Pound).

    Specification

    Product Detail
    Color Red
    Size 20Kg-270
    Dimensions 0.787401574x0.143x1.56299212439
    Weight 0.143
  • Warning Warning - California Proposition 65

    This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

    Reviews (0)

    Write a review


    Your Name:


    Your Email:


    Your Review:

    Note: HTML is not translated!

    Rating: Bad            Good

    Enter the code in the box below:




    FAQ not available.