Note:/Br> 1. The Maximum Operating Current Of This Battery Is Only About 1.5A, Can Not Be Used For Unmanned Aerial Vehicles, Model Aircraft Or Power Tools And Other Products That Require High Current/Br> 2. Connector Is Micro Jst 1.25 Plug, It Can Be Used For Esp32 Ar Duino Development Board Whose Plug Is 1.25Mm/Br>/Br> Specification:/Br> Standard Voltage: 3.7V/Br> Capacity: 3000Mah/Br> Approx Weight : 35G/Br> Dimensions(2Mm): 50 * 34 * 10 Mm /1.96 * 1.33 * 0.39Inch(L*W*H)/Br> Discharge Rate: 1C/Br> Working Current: 1.5A/Br> The Maximum Discharging Current: 3C/Br> Overcurrent Protection: 1.8-2.1A/Br> Type Of Connector: Micro Jst 1.25/Br>/Br> What You Will Get:/Br> 4 * 3000Mah 3.7V Lithium Rechargeable Batteries

Features

Note: The Battery Overcurrent Protection Is Not A Panacea, Do Not Continue To Charge And Discharge The Current And Voltage With A Large Current Beyond The Range, Otherwise The Protection Board Will Be Damaged And Invalid

3000Mah: The Recommended Charging Current Is 0.6A, The Maximum Does Not Exceed 3A. The Discharge Current Is Recommended 1.5A, And The Maximum Does Not Exceed 3A

Over-Discharge Protection: When The Battery Is About To Run Out And The Voltage Is As Low As 3.0V, The Protection Board Will Also Be Turned Off And Can No Longer Be Discharged, Forming An Over-Discharge Protection Effect

Overcharge Protection: When Charging The Battery, When The Voltage Reaches The Highest Battery Voltage (4.2V), The Protection Board Will Automatically Power Off And Shut Down, Indicating That It Will Not Continue To Charge When Fully Charged, Forms Overcharge Protection

Short Circuit Protection: When An Accidental Short Circuit Occurs, The Protection Board Will Automatically Shut Down Within A Few Milliseconds And Will Not Be Powered On Again. Note That The Cell Is Short-Circuited (Not Through The Protection Board). The Protection Board Will Also Fail Due To Continuous High Current, Or The Components Are Heated And Damaged

Specification

Product Detail
Color	Light silver 3000mAh
Weight	0.4